Invisible Software

Linksys Ether16 Lan Card


There have been two occasions where customers reported getting the following error attempting to use the Linksys Ether16 LAN card with the DOS and Windows 3.X version of Invisible LAN:

3070 Presence test failed

The error occurs when using the the NE2000 Hardware Type in the Adapter Independent software.

The controller chip has one of these "YES, it runs with Netware" labels on it, so it is not easy for the customer to identify the controller chip. We obtained one of the cards and peeled back the label. The Ethernet controller has a DLxxxx marking on it, and we concluded that it is a D-Link Ethernet controller chip.

Hence, the correct Network Hardware Type is:


This has been confirmed with Linksys's tech support.


Notices: Copyright 1996 by Invisible Software, Inc. Invisible Software and InvisibleLAN are trademarks of Invisible Software, Inc. Other trademarks are the property of their respective holders.

This document was prepared on 03/06/96, and was believed to be accurate as of that date. Procedures, specifications, and compatibility may change without notice, and therefore this document may be out-of-date and/or inapplicable to current product versions. Invisible Software provides this document "AS IS" and without warranty of any kind. Under no circumstances shall this document be construed as creating or expanding any warranty of product performance.


Go back to Support FAQ.