This program works with the adapter independent version of Invisible LAN for DOS and Windows 3.X. It lets you use PCI Ethernet adapters that have the Realtek 8029 controller chip. These adapters are often advertised as "NE2000 compatible" PCI adapters.

There is an included text file with instructions. For additional help, go to our Support FAQ section, and look at the FAQ on "Realtek 8029-based PCI Ethernet Card".

This program works with Invisible LAN for DOS and Windows 3.X. It lets you use a plug-and-play NE-2000 compatible ISA Ethernet adapter, when the adapter is configured to operate in plug-and-play mode.

There is an included text file with instructions. For additional help, go to our Support FAQ section, and look at the FAQ on "Plug-and-Play NE-2000 Compatible ISA Ethernet Card".

This driver is for use with versions 3.54C through 4.00J of adapter independent Invisible LAN. It adds support for boards that have MII-type media interface chips. (If you are getting a "3084" error message when you start the network, this driver should correct the problem.)

Beginning with version 4.00K, Invisible LAN already includes this driver. Therefore, you don't need to download this file if you have Invisible LAN 4.00K or later.

This driver is for use with versions 3.52 through 3.54A of adapter independent Invisible LAN. It adds support for the 3C509B Ethernet board.

Beginning with version 3.54B, Invisible LAN already includes this driver. Therefore, you don't need to download this file if you have Invisible LAN 3.54B or later.

These drivers are for use with version 3.54 of adapter dependent Invisible LAN. They add support for 100 Mbps Invisible Ethernet PCI adapters.

Beginning with version 4.00, Invisible LAN already includes these drivers. Therefore, you don't need to download this file if you have Invisible LAN 4.00 or later.

This driver is for use with version 3.41 or later of adapter independent Invisible LAN. It is an NDIS-2 driver for the National Semiconductor adapter, which allows the adapter to work with Invisible LAN as an NDIS Ethernet board.

This driver works with the adapter independent version of Invisible LAN for Windows 95. It lets you use PCI Ethernet adapters that have the Realtek 8029 controller chip. These adapters are often advertised as "NE2000 compatible" PCI adapters.

Note: Some early versions of the Windows 95 driver for Realtek 8029 did not work properly with Invisible LAN. We have found that some card manufacturers are distributing these early drivers that don't work with Invisible LAN. If you have trouble using the Windows 95 driver that came with your card, try using this driver instead. The driver in W95_8029 has been tested with Invisible LAN and verified to work. Also, check out Realtek's web site to get the very latest driver.

This file is a self-extracting archive.